The MBot Grid II+ comes in reusable, durable packaging that has been specially designed to protect your MBot Grid II+ in transport. To properly unpack your MBot Grid Grid II+, please follow the steps described below.
1. START UNBOXING
After having opened the cardboard box in which your MBot Grid II+ was delivered the unboxing can begin. Start unpacking by taking the MBot Grid II+ out of the cardboard box.
2. REMOVING THE FOAM PACKAGING
In the foam part at the front side of your MBot Grid II+ you will find a spool with PLA filament and a test print done on your MBot Grid II+. Take these out and put them aside. Open up the complete packaging by removing the two foam parts at the front and the back side. Now you can take out the MBot Grid II+ and place it on your desk. Make sure you hold the MBot Grid II+ on the frame and don't hold it on the belts or axes while carrying it.
3. REMOVING PROTECTION
There is some packaging material under the build plate. You can easily remove it by lifting the build plate with your hands. At last, cut the zip tie with which the print head is secured and your MBot Grid II+ is ready to use!
4. WHAT'S INCLUDED?
Supplied with your MBot Grid II+ is an SD card in the 3D printer and several other accessories as well. This is everything you need to start printing.
- Build bed
- Spool holder
- SD card
- Power cord
- USB cable