MBot3D Support
Always here to help

Unboxing

Robin Shakya

The MBot Grid II+ comes in reusable, durable packaging that has been specially designed to protect your MBot Grid II+ in transport. To properly unpack your MBot Grid Grid II+, please follow the steps described below.

START UNBOXING

After having opened the cardboard box in which your MBot mini was delivered the unboxing can begin. Start unpacking by taking the MBot mini out of the cardboard box.

REMOVING THE FOAM PACKAGING

In the foam part at the front side of your MBot mini you will find a spool with PLA filament and a test print done on your MBot mini. Take these out and put them aside. Open up the complete packaging by removing the two foam parts at the front and the back side. Now you can take out the MBot mini and place it on your desk. Make sure you hold the MBot mini on the frame and don't hold it on the belts or axes while carrying it.

REMOVING PROTECTION

There is some packaging material under the build plate. You can easily remove it by lifting the build plate with your hands. At last, cut the zip tie with which the print head is secured and your MBot mini is ready to use!

WHAT'S INCLUDED?

Supplied with your MBot mini is an SD card in the 3D printer and several other accessories as well. This is everything you need to start printing.

  1. Build Plate
  2. Spool holder
  3. SD card
  4. Power cord
  5. USB cable
  6. Toolbox
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Open A Support Ticket