MBot Grid II+ reinstalling firmware by USB cable
NB: This firmware is strictly for MBot Cube Kit 12V base on Atmega 2560 chip motherboard. For Old model consult with Technical support team.
Please visit at the bottom of the page for downloanding AvrdudeTool and Firmware.
1. Connect computer and 3D printer
Turn on the MBot Grid II+ , connect the printer to computer with USB port
2. Selecting firmware
Run the “AvrdudeTool.exe”, click the “open Hex” and select the firmware for example “mbot_cube_newboard_v7.7.0.hex”
Different model MBot 3D Printer have different firmware
3. Installing firmware
Click the “reset” button on the mother board and the “update” on the computer, you should click these buttons quickly, if it doesn’t work, you can try it again
4. Message display
When the installing is success, it will show message as on the picture
Please follow the above steps. Any other problems and questions, contact us at firstname.lastname@example.org
Download AvrTool and firmware MBot Grid II+